- Accessories
- Armrests
- Batteries
- Battery Box Assemblies
- Battery Chargers
- Bearings
- Brakes
- Circuit Breakers
- Clearance and Discounted Items
- Controllers
- Drive Belts
- Footrests & Leg Rests
- Fuses & Fuse Holders
Popular Mobility Brands
Currie 24 Volt 25A 3-Pin Controller (Schwinn, GT, IZIP, & Mongoose Scooters)
SKU:
Z09-1669
Currie Technologies:
SD-105-1
Currie 24 Volt 25A 3-Pin Controller (Schwinn, GT, IZIP, & Mongoose Scooters)
SKU:
Z09-1669
Currie Technologies:
SD-105-1
$41.99
- Factory OEM electric scooter controller from Currie Technologies
- The 24 Volt 25 Amp controller is an exclusive Currie Technologies design, with Currie's PWM Smart Power Microprocessor
- 30 Day Warranty
You May Also Like
Page
1
/
2
Page
1
/
2
Description
Factory OEM electric scooter controller from Currie Technologies.
The 24 Volt 25 Amp controller is an exclusive Currie Technologies design, with Currie's PWM Smart Power Microprocessor. The controller is fully water-proof, with brake inhibit power cut off.
Controller comes with four connectors for easy installation. Note that one of the connectors has three pins within the connector. Not compatible with 6-pin or 5-pin versions.
Known Compatibility:GT Electric Scooters
IZIP Electric Scooters
Mongoose Electric Scooters
Schwinn Electric Scooters
COMPATIBILITY NOTE
This scooter controller compatible with your version of Currie scooter only if your current controller has the identical connectors as shown in the picture and described below. There may be additional versions of controllers that are used on the scooters listed in the compatibility list below. Please check the picture and description carefully prior to ordering.
⚠ WARNING California Residents: Proposition 65 Warning
The 24 Volt 25 Amp controller is an exclusive Currie Technologies design, with Currie's PWM Smart Power Microprocessor. The controller is fully water-proof, with brake inhibit power cut off.
Controller comes with four connectors for easy installation. Note that one of the connectors has three pins within the connector. Not compatible with 6-pin or 5-pin versions.
Known Compatibility:
COMPATIBILITY NOTE
This scooter controller compatible with your version of Currie scooter only if your current controller has the identical connectors as shown in the picture and described below. There may be additional versions of controllers that are used on the scooters listed in the compatibility list below. Please check the picture and description carefully prior to ordering.
⚠ WARNING California Residents: Proposition 65 Warning