- Accessories
- Armrests
- Batteries
- Battery Box Assemblies
- Battery Chargers
- Bearings
- Brakes
- Circuit Breakers
- Clearance and Discounted Items
- Controllers
- Drive Belts
- Footrests & Leg Rests
- Fuses & Fuse Holders
Popular Mobility Brands
LED Tail Light for TaoTao ATA110B, ATA110B3, & Boulder B1 ATVs, & GK110 Go-Kart
SKU:
E41-0311
LED Tail Light for TaoTao ATA110B, ATA110B3, & Boulder B1 ATVs, & GK110 Go-Kart
SKU:
E41-0311
$9.99
- Additional illumination in low-light conditions
- Enhances rider safety
- Uses 18 LED diode lights mounted on a circuit board
- Easily removable red lens
- 8.3" wires with 2-pin connector
- A replacement LED taillight for TaoTao ATA110B, ATA110B3, & Boulder B1 ATVs, and the TaoTao GK110 go-kart is essential for safety
- These TaoTao ATVs and 'karts great machines, but any tail light on an ATV or go-kart is going to be exposed to breakage
- 30 Day Warranty
You May Also Like
Page
1
/
2
Page
1
/
2
Description
A replacement LED taillight for TaoTao ATA110B, ATA110B3, & Boulder B1 ATVs, and the TaoTao GK110 go-kart is essential for safety. These TaoTao ATVs and 'karts great machines, but any tail light on an ATV or go-kart is going to be exposed to breakage. Let us help you keep your TaoTao rolling with a new tail lamp.
This taillight uses 18 LED diode lights mounted onto the circuit board and the red lens is easily removable.
Note: This taillight is very similar, but not interchangeable with the LED Tail Light for TaoTao ATA110B, ATA110B3, & Boulder B1 ATVs, & GK110 Go-Kart. This assembly uses a 2-wire 2-pin connector while the other uses a 3-wire 3-pin connector.
⚠ WARNING California Residents: Proposition 65 Warning
This taillight uses 18 LED diode lights mounted onto the circuit board and the red lens is easily removable.
Note: This taillight is very similar, but not interchangeable with the LED Tail Light for TaoTao ATA110B, ATA110B3, & Boulder B1 ATVs, & GK110 Go-Kart. This assembly uses a 2-wire 2-pin connector while the other uses a 3-wire 3-pin connector.
⚠ WARNING California Residents: Proposition 65 Warning
Specifications
Height: 35 mm (1.38")
Width: 129 mm (5.08")
Wire length: 210 mm (8.3")
Connector: 2-pin
Mounting stud thread: 6M-1.0
Stud spacing (center to center): 87.5mm (3.45")
Width: 129 mm (5.08")
Wire length: 210 mm (8.3")
Connector: 2-pin
Mounting stud thread: 6M-1.0
Stud spacing (center to center): 87.5mm (3.45")