This Razor control module and throttle bundle can be used on all versions of the Razor Dune Buggy.

The included HB2430-TYD6K-FS controller and 6-wire variable speed twist grip throttle are used on versions 12 and up of the Razor Dune Buggy. However, this bundle can also be used to retrofit versions 1-11 of the Dune Buggy.

Why would you want to retrofit your version 1-11 Dune Buggy with this bundle? Because unfortunately, the original factory-supplied control module used on versions 1-11 of the Razor Dune Buggy has been discontinued by Razor and is no longer available. Luckily, the only difference between the controller used on versions 1-11 and the new one used on versions 12 and up is that the older controller was designed to be used with a 5-wire throttle while the newer controller is designed to work with a 6-wire throttle. By replacing the controller and throttle at the same time, you are ensured a perfect retrofit for your older version 1-11 Razor Dune Buggy.

Because this bundle includes a matching control module and throttle, it can be used on any version of the Razor Dune Buggy.

Need installation instructions? Click the following link:

Razor Dune Buggy Control Module Installation Instructions

Note: Model versions can be determined based on the product ID code on your Razor product. The product ID code can be found underneath the frame, on the battery cover, on the original battery charger, or on the cardboard box in which your Dune Buggy came. The 7th and 8th numbers in your product ID code are the version number of your Razor product (e.g. "01" = Version 1, "02" = Version 2, etc.). The image below shows a product ID of a version 9 Razor model:



⚠ WARNING California Residents: Proposition 65 Warning