- Accessories
- Armrests
- Batteries
- Battery Box Assemblies
- Battery Chargers
- Bearings
- Brakes
- Circuit Breakers
- Clearance and Discounted Items
- Controllers
- Drive Belts
- Footrests & Leg Rests
- Fuses & Fuse Holders
Popular Mobility Brands
Steering Ball Joint for the Coleman AT200-B ATV
SKU:
E42-0299
Steering Ball Joint for the Coleman AT200-B ATV
SKU:
E42-0299
$12.99
- May be compatible with other brands & models
- May be used on both left & right sides
- M12x1.25 threaded stud
- 5/8-18 A-arm thread
- The steering ball joint for the Coleman AT200-B ATV uses the M12x1.25 threaded stud, and the longer 5/8-18 threaded a-arm stud
- The ball joint includes the rubber boot, a grease zerk, an M12x1.25 castle nut, a 5/8-18 nut, and a lock nut for the stud
- 30 Day Warranty
You May Also Like
Page
1
/
2
Page
1
/
2
Description
The steering ball joint for the Coleman AT200-B ATV uses the M12x1.25 threaded stud, and the longer 5/8-18 threaded a-arm stud. The ball joint includes the rubber boot, a grease zerk, an M12x1.25 castle nut, a 5/8-18 nut, and a lock nut for the stud. The use of metric and ASI thread on the same ball joint is not unusual.
Ball joints are vital to your steering system and should always be replaced when worn.
⚠ WARNING California Residents: Proposition 65 Warning
Ball joints are vital to your steering system and should always be replaced when worn.
⚠ WARNING California Residents: Proposition 65 Warning
Specifications
Overall length: 4-1/2"
Overall height: 2-5/8"
Ball joint stud thread: M12x1.25
Fixed a-arm stud thread: 5/8-18
Fixed a-arm stud length: 2-7/8"
Overall height: 2-5/8"
Ball joint stud thread: M12x1.25
Fixed a-arm stud thread: 5/8-18
Fixed a-arm stud length: 2-7/8"