36 Volt 500 Watt Motor, Controller, & Throttle Kit

Item: X98-1069
Razor: W15128190030

36 Volt 500 Watt Motor, Controller, & Throttle Kit

Item: X98-1069
Razor: W15128190030
Throttle: Select Throttle
Select your option
Availabilty may vary
Checking status...


36 volt 500 watt motor, controller, & throttle kit.

36 Volt 500 Watt Electric Motor with #25 Chain Sprocket (MY1020)
This high powered 36 volt motor is compatible with many brands of branded and generic electric scooter, including models from Minimoto, Razor, and X-Treme scooters.

Note: This motor is capable of rotation in either the clockwise or counterclockwise direction by reversing the motor's power wires.

T53-6119 (Full Grip Throttle)
Hand Throttle with 3 Wires
Electric scooter, pocket bike, and dirt bike 3 wire hand throttle. This is the most common type of throttle used on electric scooters.

T53-6165 (Half Grip Throttle)

Like the full grip throttle listed above, this three-wire hand throttle is typically used in a variety of electric scooter, pocket bike, and dirt bike applications. For situations where a half grip throttle would be more appropriate, we recommend this version of the kit.

36 Volt 500 Watt Universal Speed & Voltage Controller
Wiring Details:
Red to Red
Black to Black (or Yellow)
Green (or Blue) to Green (or Blue or White)

Note: All scooter controllers require a switch, (joined to the "Lock" connector on the controller wires), in order to complete the electrical circuit.

Questions & Answers

Thank you for your question! Once someone answers your question it will be posted on the site and you will get a notification by email. Submit another question?
Cuántas millas por ora puede correr un bugyy car con este motor de 36 voltios

[How many miles per hour can a buggy car run with this 36-volt motor?]
Desafortunadamente, no podemos proporcionar esa información, ya que el MPH varía según el terreno, el peso de la unidad + el usuario y el tamaño de la rueda dentada. Este motor tiene una clasificación de 2500-3000 RPM, sin embargo.

[Unfortunately, we are unable to provide that information, as MPH varies based on terrain, weight of the unit + rider, and sprocket size. This motor has a rating of 2500-3000 RPM, however.]
The throttle controller that came with the kit has 4 wires (red, yellow, green and blue). How would I set this up with main controller
The controller should have a 3-pin throttle connector, with Red, Black, and Blue wires. To connect the 4-wire throttle, connect the wires accordingly:
Red (throttle) to Red (controller)
Yellow (throttle) to Black (controller)
Blue (throttle) to Blue (controller)
Will the motor also work with 24v?
This is a 36 Volt motor. If you are looking for a similar 24 Volt kit, please review the one at the following link:



Voltage: 36 Volt
Output: 500 Watts