Note: This seat is not returnable.
Note: There are seat width restrictions on most scooter and power chair models. Before ordering, please read the Specs tab for further information.
We offer the complete Medium-Back Deluxe Contour vinyl seat assembly for Pride scooters in three colors, five depths, and seven widths. Sold as a complete set at one low price; the vinyl seat assembly for Pride scooters includes a Deluxe Contour seat base, a medium-back Deluxe Contour seat back, and a set of angle adjustable, pinchless seat hinges.
How to measuring your seat:
Measuring Usable Seat Depth-- Refer to Figures 1 and 2
1. Position a carpenter's square on the middle of the seat as shown.
2. Slide the square back until it just makes contact with the seatback. Keep the horizontal section of the square parallel with the floor. This will allow for contours such as cushioning bolsters.
3. Measure the distance between points
A and
C. This measurement is the seat's usable seat depth.
Measuring Usable Seat Width-- Refer to Figure 2
1. Measure 4-1/2" from point
A to find line
B-D.
2. Measure the distance between
B and D. This measurement is the usable seat width.
These seat assemblies are compatible with most models of the popular Jazzy and Jet power chairs, as well as many Pride scooters, however be sure to check the Compatibility tab and your scooter's owner's manual before ordering. Please note that all of the compatible Pride scooters listed have a maximum seat allowance of 22" wide and 22" deep, and seat assemblies with larger width or depth measurements should not be used.
As an authorized dealer for Pride scooter parts, Monster Scooter Parts can offer our customers these genuine factory Pride and Jazzy seat assemblies at the best price around.
In order to ensure the correct fit, we strongly encourage you to read our
Mobility Seat Measuring Guide before ordering these seat assemblies, or other seating component.
⚠ WARNING California Residents:
Proposition 65 Warning