24 Volt HB2430-TYD6-FS 6-Wire Controller & Throttle Bundle for Razor Pocket Mods (Versions 1-7) - Retrofit Combo for Discontinued 4-Wire Version

HB2430TYD6-FS 6-wire throttle & controller bundle, for versions 1 through 7 of the Razor Pocket Mod. Replaces the discontinued CT-201, CT-201-C6, and HB2430-TYD-FS control modules. 

This controller does not replace the CT101 controller. If your scooter has the CT101 controller, you will need an adaptive wire harness from Razor to connect the CT201C controller.

Note: This 24 volt throttle is not compatible with the 36-volt Razor Pocket Mod Bellezza or 4-wire Razor Pocket Mod Petite. 

Note: Model versions can be determined based on the product ID code. The Pocket Mod 19-digit ID can be located on the rectangular white sticker inside the seat compartment, on the battery cover, on the underside of the frame, or on the original battery charger. The 7th and 8th numbers in your product ID code are the version number of your Razor product (e.g. "01" = Version 1, "02" = Version 2, "09" = Version 9, etc.).

Need installation instructions? Click the following link:

Razor Pocket Mod Control Module Installation Instructions

Note: The original 4-wire CT-201C6 control module has been discontinued by the manufacturer and is no longer available. This 6-wire controller and throttle kit will replace the discontinued controller.

Original Razor: W13112099015

Voltage: 24V
Maximum Current: 29A
Deficiency Voltage Protect: 20.5V