Cart 0 Cart

196cc, 200cc, & 212cc Carburetor with 24 mm Air Intake for the Baja Mini Bike MB165 & MB200

SKU: X98-7159
Replaces Baja Motorsports: 165-171, MB200-312

196cc, 200cc, & 212cc Carburetor with 24 mm Air Intake for the Baja Mini Bike MB165 & MB200

SKU: X98-7159
Replaces Baja Motorsports: 165-171, MB200-312
$26.99 - $53.48
  • With optional Standard Filter, optional High Performance Filter, or without any optional air filter
  • Perfect for the Baja Mini Bike
  • Fits many 6.5 Hp engines
  • Because a carburetor works best when the air that flows into it is clean, we offer this fine carb with a standard air filter, or with a high performance air filter to keep the dust and crud out, or without any optional filter
  • Whether you only need the carb or if you prefer one of the carb & filter combinations, we are sure that our easily-installed carburetor with 24 mm air intake will enhance your engine's performance
  • 30 Day Warranty
View full description
Select Your Option
Select Your Option
Availability may vary

Description

Because a carburetor works best when the air that flows into it is clean, we offer this fine carb with a standard air filter, or with a high performance air filter to keep the dust and crud out, or without any optional filter. Whether you only need the carb or if you prefer one of the carb & filter combinations, we are sure that our easily-installed carburetor with 24 mm air intake will enhance your engine's performance. This carburetor is compatible with 196cc, 200cc, and 212cc mini bike, pit bike, and go-kart engines, and is equipped with a manual choke, and a fuel shut off valve.

The carburetor has a water trap feature that prevents water condensation from getting into your carb and freezing overnight. The trap is the small reservoir directly under the fuel cut-off switch, and it allows the carb to be periodically cleaned of water, ice, and other carb-clogging gunk.

This mini bike carb is compatible with both Baja Motorsports Mini Bike MB165 (196cc engine) and MB200 (200cc engine) models, as well as the 212cc aftermarket Baja mini bike engine sold here at Monster Scooter Parts.

High Performance Filter Note: This filter assembly includes a stack. This is the large machined alloy ring with a beveled inside diameter that fits into the rubber base of the filter. When mounting this filter assembly, always make sure that the wider end of the hole is inside of the filter and the smaller or narrower end of the hole is on the carburetor side. When properly mounted, the stack functions as a venturi, smoothing the air flow into the carburetor and likewise smoothing the engine's running.

We recommend replacement of the carburetor gasket when replacing the carburetor, as it is easily ripped and torn when removing the old carburetor. The gasket can be found at the link below:

Carburetor Gasket & Insulator with 24 mm Air Intake for 163cc 5.5 Hp & 196cc 6.5 Hp Engines

⚠ WARNING California Residents: Proposition 65 Warning

Specifications

Air Intake Inner Diameter: 24 mm
Engine Intake Inner Diameter: 19 mm
Overall Depth: 5.4 cm
Overall Width: 8 cm
Overall Height: 10.5 cm
Center to Center Mounting Hole Distance: 43 mm
Mounting Holes Diameter: 6 mm
Choke: Manual
Fuel Line Length: 16 cm +/-
Fuel Line Inner Diameter: 5 mm
Fuel Line Outer Diameter: 8 mm
Drain: No
Fuel Shutoff: Yes

Standard Filter:
Length: 100 mm
Width: 75 mm
Height: 70 mm

High Performance Filter:
Overall Diameter at Widest Point: 95 mm
Overall Diameter at Top: 85 mm
Rubber Intake Inner Diameter: 60 mm
Rubber Intake Outer Diameter: 74 mm
Overall Height: 160 mm

Reviews

4.9
out of 5
5 Star
4 Star
3 Star
2 Star
1 Star
William N
December 16th, 2021
Put it on and fired up on second pull. Almost no tuning needed. Fast delivery This is on a older predator 212.
David H
April 3rd, 2021
Randy H
March 31st, 2021
Great price and fit perfectly.
James W
November 29th, 2020
Works awesome have an old Baja Heat bolted right up and runs very well right out of the box
Kevin B
September 17th, 2020
Perfect fit literally bolted it on out of the box. Put some fresh gas in and it started 1st pull.
Jerry H
September 15th, 2020
Michelle H
September 10th, 2019
Worked awesome right out of the box will Purchase again
Richard W
May 30th, 2019
Ordered this because my old carb was flooding. Put this on as soon as delivery and I haven't had a problem since.
Shona B
August 13th, 2018
It's what i needed
Pete B
May 15th, 2018
Kip H
February 16th, 2018
great price, fast shipping. runs like new!!
Jeffrey S
January 8th, 2018
installed it and started it right up. i didn't have to do any primary adjustments.
Constance V
December 15th, 2017
Chris S
August 26th, 2017
Bolted it on and the bike fired right up. Worked excellent
Bradley B
August 10th, 2017
Bolted right up and worked like a charm!
Radakewl
June 27th, 2017
Bolted right on and running great!!
Mark Q
May 30th, 2017
Larry W
April 20th, 2017