Cart 0 Cart

Thumb Throttle with 4 Wires for Razor Scooters (E200/E200S, E300/E300S, Ground Force, Ground Force Drifter, & Dune Buggy)

SKU: T53-6141
Razor: W13112099043-M

Thumb Throttle with 4 Wires for Razor Scooters (E200/E200S, E300/E300S, Ground Force, Ground Force Drifter, & Dune Buggy)

SKU: T53-6141
Razor: W13112099043-M
$14.99
$12.74 Save 15%
  • Thumb throttle for the Razor E200 (versions 1-4 only), E300 (version 1 only), Ground Force Go-Kart (versions 1-12), Ground Force Drifter (Versions 1-2), and Dune Buggy (versions 1-11)
  • This throttle is only one of many electric scooter parts we offer for Razor scooters
  • 30 Day Warranty
View full description
Checking status...
Checking status...

You May Also Like

Description

Thumb throttle for the Razor E200 (versions 1-4 only), E300 (version 1 only), Ground Force Go-Kart (versions 1-12), Ground Force Drifter (Versions 1-2), and Dune Buggy (versions 1-11).

This throttle is only one of many electric scooter parts we offer for Razor scooters. Throttle has four wires. Check below for functionality of each wire. Throttle wire measures 60".

This throttle can also be used as a replacement for 3 wire thumb throttles. In a three wire application the yellow wire (battery level indicator) will not be used.

Prior to ordering, make sure your controller's four throttle wires are red, black, green, and yellow. Also measure your controller's four wire throttle connector and verify you have 4.5 - 6.0 volts between the red and black wire. If you do not read this level of voltage this throttle is not compatible OR your controller needs to be replaced.

Throttle Wire Color to Controller Wire Color (Description)

  • Red to Red (4.5 - 6.0 Volts Power)
  • Black to Black (Ground)
  • Green to Green or Blue (Speed Signal)
  • Yellow to Yellow (Optional Battery Level Indicator)


  • The wiring diagrams for this part can be found at the following links:
  • Razor Dune Buggie Wiring Diagram (Versions 1-5)
  • Razor Dune Buggie Wiring Diagram (Versions 6-11)
  • Razor E200 Wiring Diagram (Versions 1-4)
  • Razor E300 Wiring Diagram (Version 1)
  • Razor Ground Force Go Kart Wiring Diagram (Versions 1-6)
  • Razor Ground Force Go Kart Wiring Diagram (Versions 7-12)


  • ⚠ WARNING California Residents: Proposition 65 Warning

    Questions

    Will this work with the stock controller and give you variable speeds on the razor e300 thanks
    This thumb throttle will work with the stock controllers for the models and versions specified under the Compatibility tab. Sadly the throttle alone will not give you variable speed capabilities, that is a joint effort between the controller and throttle together. If you wish to get variable speed, you will need to order a controller and throttle for your model that states it is for variable speeds.

    Reviews

    5
    out of 5
    5 Star
    4 Star
    3 Star
    2 Star
    1 Star
    Jason K
    May 25th, 2017
    simple to replace, the existing metal contacts have a tab on them you use a flat head to push closed to remove from plastic boot (if you pull too hard the wire will separate making it hard to remove the old leads) and you install the new leads into the existing boot matching the wires in the battery compartment. fixed the symptom of the throttle cutting in and out while riding.