Razor CT-201C6 Controller/Control Module, 4 Wires to Throttle (E200, E300, E500S, Mini Chopper, Pocket Mod, Pocket Rocket, Rebellion)

Razor OEM CT-201C6 control module. Also replaces the earlier CT-201 control module.

Controller has five sets of wires with harnesses (13 wires total) labeled as follows: battery, brake, electric charger, motor, timing. Replaces Razor scooter versions that came with a 4-wire throttle only.

Note: Model versions can be determined based on the product ID code on your Razor product. The product ID code can be found on the battery cover and/or on the bottom of the frame. The 7th and 8th numbers in your product ID code are the version number of your Razor product (e.g. "01" = Version 1, "02" = Version 2, etc.).

Controller may come with model number CT-201C6, HB2430TYD4-FS, or CT-601C6-3. All model numbers are interchangable. Model numbers vary based on the factory that produced the controller.

INSTALLATION PROCEDURES (requires Adobe Acrobat Reader):

• Ground Force Go-Kart
• Mini Chopper
• Pocket Rocket

SPECIFICATIONS:
CT-201C6, HB2430TYD4-FS, or CT-601C6-3 Controller
Voltage: 24V
Maximum Current: 29A
Deficiency Voltage Protect: 20.5V

NOTE: Does not replace the CT101 controller. If your scooter has the CT101 controller, you will need an adaptive wire harness from Razor to connect the CT201C controller.

Razor E200, E200S, E225 (versions 1-9)

Razor E300, E300S, E325S (versions 1-7)

Razor E500S (versions 1+)

Razor Mini Chopper (versions 1+)

Razor Pocket Mod (versions 1-7)

Razor Pocket Rocket (versions 1-5)

Razor Rebellion (versions 1+)