Cart 0 Cart

4 Key Keypad for Dynamic A-Series Joystick Controllers

Invacare
SKU: A29-3707
ActiveCare: DC GLA81043
Invacare: 1165880

4 Key Keypad for Dynamic A-Series Joystick Controllers

Invacare
SKU: A29-3707
ActiveCare: DC GLA81043
Invacare: 1165880
$79.99 +Free Shipping
  • Replacement stick-on keypad for the Dynamic A-Series joystick controller used with all ActiveCare power chair models, some versions of the Invacare Pronto M41, and others
  • Includes 4 keys (buttons) as follows: power, horn, rabbit, and turtle
  • 30 Day Warranty
View full description
Checking status...
Checking status...

Description

Replacement stick-on keypad for the Dynamic A-Series joystick controller used with all ActiveCare power chair models, some versions of the Invacare Pronto M41, and others.

Includes 4 keys (buttons) as follows: power, horn, rabbit, and turtle.

The Dynamic A-Series is a high quality, yet cost-effective, 50 amp integrated controller for power wheelchairs. It offers class-leading drive performance and is ideal for lightweight or folding chairs and drive only applications.

Installation Instructions:
1. Ensure the wheelchair power is turned off.
2. Pull the gray collar back and disconnect the joystick cable from the joystick.
3. Peel up and remove the existing, damaged keypad from the joystick face plate.
4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and/or damage.
5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.
6. Ensure no adhesive remains around the rim of the joystick face plate.
7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.
8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.
9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.
10. Remove the backing from the new keypad.
11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.
12. Working from the bottom up, gently press the keypad completely into the joystick face plate.
13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.
14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad.
15. Connect the joystick cable to the joystick.
16. Turn on wheelchair power and test the joystick functions.
17. If the joystick does not function properly, you may have a faulty joystick.



⚠ WARNING California Residents: Proposition 65 Warning

Reviews

5
out of 5
5 Star
4 Star
3 Star
2 Star
1 Star
Ted H
May 8th, 2019
This keypad worked perfectly! My mother's Invacare scooter's power button was no longer working. Part arrived quickly, and it was merely a matter of peeling off the old key pad, cleaned the contacts, and installed the new key pad, and everything is working just the way it should. A great product at a great price. Thanks Monster Scooter Parts!
Michael K
April 13th, 2019
Very fast shipping and I actually had to change my order and it still got delivered ahead of schedule!
Errol W
March 12th, 2019
Terrence S
March 1st, 2019
My wife had to press increasingly harder to turn her power chair on. After I replaced the keypad it now starts at a simple light press of the on/off switch. Great result!!!
7743 D
February 6th, 2019
John I
March 28th, 2018
Lu S
July 29th, 2017
Lorna B
April 28th, 2017
Works perfectly