Note: The original 4-wire CT-201C6 control module has been discontinued by the manufacturer and is no longer available. This 6-wire controller and throttle kit will replace the discontinued controller.
The throttle in this kit may be labeled for 36 volt batteries, but the throttle will still work with your 24 volt controller.
201C6-3A / HB2430TYD-FS razor 6-wire throttle & controller bundle, for all versions of the Razor E500S. Replaces the discontinued CT-201 and CT-201C6 control modules. The original controller may come with model number HB2430-TYC4-ROHS, HB2430-TYD4-ROHS CT-201C6, HB2430-TYD4-FS-ROHS, or CT-601C6-3. Model numbers vary based on the factory that produced the controller.
This controller does not replace the CT101 controller. If your scooter has the CT101 controller, you will need an adaptive wire harness from Razor to connect the CT201C controller.
Note: Model versions can be determined based on the product ID code on your Razor product. The product ID code can be found on the battery cover and/or on the bottom of the frame. The 7th and 8th numbers in your product ID code are the version number of your Razor product (e.g. "01" = Version 1, "02" = Version 2, etc.).
Original Razor Part Number: W13112099015
Original Model Numbers:
Model Number: HB2430-TYC4-ROHS, HB2430-TYD4-ROHS CT-201C6, HB2430-TYD4-FS-ROHS, or CT-601C6-3 Voltage: 24V Maximum Current: 29A Deficiency Voltage Protect: 20.5V