Cart 0 Cart

24 Volt 2.0 Amp XLR 24BC2000T-1 Battery Charger

Universal Power Group
SKU: X97-0552

24 Volt 2.0 Amp XLR 24BC2000T-1 Battery Charger

Universal Power Group
SKU: X97-0552
$59.99 +Free Shipping
  • 24 volt 2.0 amp XLR charger
  • Automatic shut-off
  • Charging indicator light
  • Premium quality
  • Our premium quality 24 volt 2.0 amp XLR connector battery charger is suitable for use on sealed lead acid (SLA) batteries with a capacity size of 7 Ah or larger
  • Typical applications include electric scooters equipped with an off-board charging female XLR socket
  • 1 Year Warranty
View full description
Checking status...
Checking status...

Description

Our premium quality 24 volt 2.0 amp XLR connector battery charger is suitable for use on sealed lead acid (SLA) batteries with a capacity size of 7 Ah or larger. Typical applications include electric scooters equipped with an off-board charging female XLR socket. Comes with 3-prong adapter plug.

PLEASE NOTE: The Low Voltage Protection feature on this battery charger will not allow the charger to activate unless it is connected to a battery pack that has a minimum voltage of 16 volts. Battery packs with voltages below that level of charge cannot be recovered or recharged. This is a safety feature to prevent overheating in the event of a faulty battery. This battery charger will not output any voltage to the XLR connector until connected to a battery pack meeting this minimum voltage requirement.

This charger features an automatic shut off when battery charging is complete. Your charging time may vary with level of battery depletion. Underwriters Laboratories (UL®) Listed. Dry location use only.

  • Short Circuit Protection - Prevents damage caused when operating in a short circuit condition for an indefinite period of time. The charger is "self-recovering" when the fault condition is removed.
  • Reverse Polarity Protection - Prevents damage when positive and negative polarities are connected in reverse.
  • Fully Automatic Operation - Safely charges and maintains a full charge. the final stage of charging is the float mode and the battery may remain connected indefinitely. In this mode, the charger maintains fully charged condition.
  • Designed to Prevent Over Charging - Automatically switches to Float Mode.
  • Complete 3-Stage Process - Bulk Charge, Absorption, Maintenance/Float.
  • Low Voltage Protection - When the battery voltage is below a preset value, the charger will not start charging.
  • LED Display
  • Lightweight - Switch mode chargers are much lighter than linear chargers.

  • LED lights indicate battery charge level as follows:
    A. POWER LED (dual color):
  • Red - Power On
  • Green - Charging Battery
  • B. CHARGING LED (Red):
  • LED on - Fast Charge
  • LED off - Float Charge

  • Warranty Information:
    Monster Scooter Parts is proud to announce a full 1 year warranty on this battery charger, covering defects in material and workmanship for a period of 1 year (12 months) from the date of receipt. Our full warranty policy can be viewed at the following link:

    Monster Scooter Parts Warranty Policy

    UPG Model: 24BC2000T-1


    ⚠ WARNING California Residents: Proposition 65 Warning

    Specifications

    UPG Model: 24BC2000T-1
    Input: 110-240 VAC, 50 - 60Hz
    Output: 24 VDC, 2.0A maximum

    Underwriters Laboratories (UL®) Listed. Dry location use only.

    XLR Connector Polarity

    Questions

    Will this work well with the GO-GO travelers elit scooter with 17 amp batteries
    This charger would be perfectly compatible with those size batteries. You could also use a 3.5 Amp charger, such as the one found at the following link:


    https://www.monsterscooterparts.com/24-volt-3-amp-xlr-battery-charger-upg.html

    Reviews

    5
    out of 5
    5 Star
    4 Star
    3 Star
    2 Star
    1 Star
    Steve C
    October 4th, 2020
    The charger arrived quickly and has performed very well. It is a quality product.
    Mark W
    February 16th, 2020
    Fast service!