Belts

Monster Scooter Parts stocks the scooter belt you need in all of the popular sizes to meet your scooter belt replacement requirements. The scooter belt change process is relatively simple, and it is a good idea to keep an extra scooter belt as a spare.

High Torque Drive (HTD) drive belts are measured by three dimensions and are typically marked as detailed below. We offer scooter belt replacement for the following models:

Bladez Ion & Moby

IZIP I-130, I-150, I-200

Minimoto Sport Racer

Razor E100, E200, Ground Force, Punk

Schwinn S-150, S-200

X-Treme X-010, X-11, X-250

PLUS MANY MORE...

560-5M/15

The first number represents the length of the belt loop (560 mm in this example).
The second number represents the peak to peak tooth spacing (5 mm in this example).
The third number represents the width of the belt (15 mm in this example).

This measurement is sometimes printed on the belt in different ways, depending on the belt manufacturer. For example, 560-5M/15 can also be shown as 5605M15, 560-5M, or 5M560. Other variations are possible.

Prepare for your next scooter belt change with a spare scooter belt replacement from Monster Scooter Parts.