36 Volt 500W Universal Speed & Voltage Controller

36 volt 500 watt universal voltage & speed controller for electric scooters, bikes, go karts, and mopeds. Seven connectors: battery, motor, brake lights, indicator, throttle (to put), brake, and power locks. You may need to cut and splice a few but not all of your old controller connectors.

This controller has been tested and verified compatible with the 36 Volt Minimoto products below. Not compatible with Go Kart or Jeep Dune Buggies.

MINIMOTO NOTE: This controller does not support a reverse and reduced speed/training mode. If used as a replacement, this controller will provide forward operation only, and the reverse and training mode will be disabled.

Compatible with most 36 Volt products equipped with 180-500 Watt motors.

Controller connections as follows:

Battery Connector
Black and red wires. Cut and splice to your existing controller battery connector or hard wire to your bike’s wiring. Black to Black, Red to Red.

Motor Connector
Blue and yellow wires. Cut and splice to your existing controller motor connector or hard wire to your bike’s wiring. Blue to Blue, Yellow to Red.

Indicator Connector
Small red and black wires. Battery charger connector, same as OEM connector. Connect to your bike’s “charge” connector.

Lock Connector
Blue and red wires. Key switch connector, same as OEM connector. Connect to your bike’s “lock” connector.

To Put Connector
3 wires: Red, black, and blue. Hand throttle connector, 3-wire. Plug your 3-wire hand throttle wires into the three prongs on this connector. Black to Black, Red to Red, Blue to the third wire on your hand throttle.

Brake Connector
Yellow and black wires. Brake connector, same as OEM connector. Connect your bike’s brake wires to this connector. Black to Black, Yellow to Red.

Brake Lights Connector
Red and yellow wires. Connects to your bike's brake lights connector.

PLEASE NOTE:
Due to the delicate nature of voltage controllers, and the care that must be taken when making wiring connections, it is Monster Scooter Parts company policy that all voltage and speed controller sales are final. Please ensure you are comfortable making delicate wiring connections and cutting and splicing wires prior to ordering. Our entire return policy can be viewed at the link below:

Monster Scooter Parts Return Policy

Voltage: 36 Volts
Current: 14 Amps maximum

Electra Voy

Minimoto ATV

Minimoto Maxii

Minimoto XRF500

X-Treme X-360

Other makes and models requiring 36V 500W controllers!