36 Volt 350 Watt Electric Motor with Mounting Bracket and #25 Chain Sprocket (MY1020)

36 Volt 350 Watt electric motor with #25 chain sprocket and mounting bracket. This electric motor is compatible with many Minimoto branded pocket bikes, atvs, and dirt bikes.

Mounting hole spacing is approximately 4" x 2-1/4" (four threaded holes).

This motor is capable of rotation in either the clockwise or counterclockwise direction by reversing the motor's power wires.

Note: Mounting hole spacing is approximately 4" x 2-1/4" (four threaded holes). These measurements do NOT line up with the Minimoto Maxii 400's original mounting holes. All customers will need to drill new holes in order to fit this motor.

Model: MY1020
Type: Brush
Voltage: 36 Volt DC
Sprocket: #25 Chain
Output: 350 Watts
Sprocket: Removable Bolt Sprocket
Case Length: 5-5/16" (135 mm)
Case Diameter: 4-1/4" (108 mm)
Drive Shaft Length: 1" (25 mm)
Drive Shaft Diameter: 5/16" (8 mm)
Bolt Hole Distance (Adjacent): 4-1/8" (105 mm)
Bolt Hole Distance (Cross Bracket): 2-3/16" (56 mm)