24 Volt 2.0 Amp XLR Battery Charger (Universal Power Group)

Premium quality 24 volt 2.0 amp XLR connector battery charger. Suitable for use on sealed lead acid (SLA) batteries of size 7 Ah or larger. Typical applications include electric scooters, mobility scooters, and power chairs equipped with an offboard charging female XLR socket. Comes with 3-prong adapter plug.

Automatic shut off when battery charging is complete. Charging time varies greatly with level of battery depletion.

PLEASE NOTE: The Low Voltage Protection feature on this battery charger will not allow the charger to activate unless it is connected to a battery pack that has a minimum voltage of 16 volts. Battery packs with voltages below that level of charge cannot be recovered or recharged. This is a safety feature to prevent overheating in the event of a faulty battery. This battery charger will not output any voltage to the XLR connector until connected to a battery pack meeting this minimum voltage requirement.

FEATURES:

Short Circuit Protection - Prevents damage caused when operating in a short circuit condition for an indefinite period of time. The charger is "self-recovering" when the fault condition is removed.

Reverse Polarity Protection - Prevents damage when positive and negative polarities are connected in reverse.

Fully Automatic Operation - Safely charges and maintains a full charge. the final stage of charging is the float mode and the battery may remain connected indefinitely. In this mode, the charger maintains fully charged condition.

Designed to Prevent Over Charging - Automatically switches to Float Mode.

Complete 3-Stage Process - Bulk Charge, Absorption, Maintenance/Float.

Low Voltage Protection - When the battery voltage is below a preset value, the charger will not start charging.

LED Display

Light Weight - Switch mode chargers are very much lighter than linear chargers.

Input: 110-120 VAC, 60Hz
Output: 24 VDC, 2.0A maximum

Underwriters Laboratories (UL®) Listed. Dry location use only.