24 Volt 500 Watt Motor, Controller, & Throttle Kit

24 volt 500 watt motor, controller, & throttle kit.

Motor:
This brush type motor is manufactured by Currie. Upgrade your stock 180W or 250W motor with a genuine Currie high performance motor kit. Dramatically increase low end torque and top end speed. It is capable of rotation in either the clockwise or counterclockwise direction by reversing the motor's power wires. Comes with a standard three hole mounting face plate that is used by most high powered Currie Technologies scooters. Center to center mounting hole distances are approximately 3-7/8".

Hand Throttle:
Electric scooter 5 wire hand throttle. "5 Pin" refers to the number of pins in the rectrangular connector that inserts into the controller. Not compatible with either 4 wire or 6 wire hand throttles.

Controller:
Currie brand 24 volt 30A 5-pin controller. Comes with a brake inhibit power cut off.

Wiring Details:
Red to Red
Black to Black (or Yellow)
Green (or Blue) to Green (or Blue or White)

Model: XYD-6B Motor
Type: Brush
Voltage: 24 Volt DC
Rated Speed: 2600 RPM
Rated Current: 28 Amp
Sprocket: #25 Chain 11 Tooth
Output: 500 Watts
Rotation: Reversible

Motor Compatibility Note:

Only compatible with scooters equipped with 5-pin controllers. Not compatible with 6-pin twist grip throttles from Currie Technologies.