CLEARANCE! We have reduced our price on this item from $407.99 to $299.99 to clear out our inventory. If you've been looking for a high quality electric bike conversion kit, now is the time to buy at this low price!
Now is the time to upgrade your ride with an electric bike kit such as the 24 volt 450 watt electric bike conversion kit with motor, batteries, battery charger, controller, throttle, and rear rim. This high quality e-bike kit is manufactured by Currie Technologies, the leader in electric bicycle production in the United States.450 watts of power from a DC earth magnet motor mounted to the rear wheel
Speeds up to 15 mph/24 km (rider weight, input and terrain contingent)
Add an optional second battery pack to double the range of this electric bike kit
Up to 10 to 15 miles/16-24 km with normal pedaling (rider weight, input and terrain contingent)
Rider age/weight limit: Young adult (13+) to adult/240 lb. (109 kg) maximum weight
Alloy 26” x 1-3/4” rear rim suitable for mounting a 26" x 1-1/2” to 26" x 2-1/8” tire
Known as the IZIP #1, this state of the art electric bike conversion kit incorporates a 450 watt electro-drive system and rack-mounted battery pack that allows the user to electrify most 26-1/2" wheel standard bicycles into a twist and go electric powered bike.
Currie Electro-Drive® Conversion Kit #1 Key Features:
Motor: 450 watts of rated power from a DC earth magnet motor. This high performance 24 volt 450 watt electric motor has a outer case diameter of 4-3/8" inches and the height of the whole motor is 4-1/2" inches from the bottom of the case to the threaded holes. 3-7/9" mounting hole circle (bottom three threaded holes). Equipped with a gear reduction transmission, this electric bike conversion kit motor weighs 5 lbs. and uses a standard bicycle chain sprocket.
Battery: This electric bike kit sports a rear rack mounted 24 volt 10 amp hour batter pack, (consists of two-12V/10Ah valve regulated, sealed lead acid rechargeable batteries in series). This electric bike conversion kit battery pack is ideal in size, with optimal weight to run time for an electric bike kit application.
Charge system: UL listed Currie Smart Charger with LED status display. The 24 volt electric bike charger features automatic shutoff when the e-bike batteries are fully charged.
Controller: Exclusive Currie Electro-Drive(TM) 24 volt fully potted with power gauge function
User controls: Power On/Off switch on back of rack; Easy access charger port in removable battery pack (Can charge on or off the bike), Twist Thumb Throttle with TAG (Twist and Go) function and battery gauge indicator for mounting on handlebar
Drive: Patented Currie Electro-Drive System. Combine with the drive train system from your standard bike to get Hybrid power.
Rear Wheel: Alloy 26" x 1.75" rim, suitable for mounting 26 x 1.5" to 26 x 2.125" tire, inner tube, and rim strip from your original bike. This electric bike conversion kit does not include a tire, tube, or rim strip. You will need to use your existing tire and tube.
Hub: The rear rim in this e-bike kit will accept the 7-speed freewheel sprocket from your original bike. You will need use your existing sprocket from your bike. The electric bike kit does not include the rear freewheel. The hub spacing is 135 mm OLN (this is a standard 7-speed freewheel sprocket).
Currie Technologies item number: IZIP-KIT1