18 Volt 1.5 Amp Minimoto Sport Racer Coaxial Battery Charger (Premium)

Premium quality 18 volt battery charger, used specifically on the Minimoto Sport Racer electric pocket bike.

Extremely hard to find 18 volt 1.5 amp coaxial battery charger for the Minimoto Sport Racer (aka Honda Minimoto Sport Racer and Ducati Minimoto Sport Racer).

5.5mm OD x 2.1mm ID coaxial/barrel connector included.

Minimoto Part Number 01846-MIS-306.

This 18V 1.5 Ah charger offers several advantages over the OEM Minimoto battery charger, including:

• Multi-stage "smart charge" algorithm is kind to the battery.
• Switchmode based instead of transformer based make the chargers smaller and lighter as well as being much more energy efficient.
• Universal Power Input means that the 18V chargers can be used in any country using anything between 90VAC and 264 VAC.

LED Indications of the 18 Volt Battery Charger:

• Black - Power on, but no battery connected
• Red - Charging
• Green - Charged/Float Charging
• Green - Desulphating phase 1, if it doesn't turn red within 3-5 days the battery is not recoverable.
• Red - Desulphating phase 2, leave in this mode up to 4 days. Then charge normally.

Model: PST-3PA3022B
Rated input voltage: 90-264 VAC, 50/60 Hz
Input Frequency: 50-60 Hz
Battery voltage: 18 volts nominal
Charging current: 1.5 amps (1500mA)
Charging algorithm: Constant current/constant voltage/float; Stage 1 constant current 1600 mA ± 100 mA; Stage 2 constant voltage 22.1 volts ± 0.25 volts; Stage 3 float charge 20.65 ±0.20 volts; "Charged" light turns on and float charge starts when the charge current is below 0.20 amps ±0.05 amps when the battery charge voltage is above 21 volts.
Output power: 130W maximum
Output voltage: 22.2 volts maximum during charge
Cooling: Natural convection, no fan
Size: 4.6"x2.4"x1.5" (117mm x 61mm x 37mm)
Protections: Reverse Polarity, Short circuit protection, Over Voltage Protection, Output current protection
Safety: CE marked, designed to EN60950, GB4946, UL1950